Tension Control System (TCS) with NiMH batteries (AA)
FIG certified.
The new Tension Control System (TCS) with rechargeable NiMH batteries (AA).
It prevents from too low or too high tensioning of an apparatus thanks to the digital display.
When tensioning becomes too low or too high it is shown by means of a flashing light signal. Guarantees same tension characteristics of an apparatus and is quick to set up for athletes & coaches.
Supplied in a solid plastic case. Equipped with flashing light and start button. Displays the battery level + and the voltage in N. The device gives the tension in Newton a range from 0 N to 10.000 N with increments of 100.
Per one tensioned gymnastic apparatus is one tensioning measuring device necessary.
Horizontal Bar "Stuttgart"
FIG-certified. ORIGINAL REUTHER.
Upright with more elasticity. Height adjustment from 265 - 310 cm anti-fracture safety bar made of high quality special stainless steel, for highest standard and safety. The double tensioning with the licensed key adjustment gives excellent support and flexibility to the apparatus.
Landing Mat "Happy Landing" 200 x 200 x 10 cm, PVC
Variants:
"Happy Landing" 200 × 200 × 10 cm, PVC
Soft landing mat with PVC-cover and zipper. Available for training use with 5 cm height and according to FIG specifications in 10 cm height.
Dimensions: 200 x 200 x 10 cm
Landing Mat "Happy Landing" 400 x 200 x 10 cm, PVC
Variants:
"Happy Landing" 400 × 200 × 10 cm, PVC
Soft landing mat in PVC cover with zip fastener. Height of 10 cm for competitions (according to the new FIG regulations).
Mandatory at FIG competitions for balance beam, uneven bars, ring frame and horizontal bar (2x).
TECHNICAL DETAILS:
Dimensions: 400 x 200 x 10 cm;
PVC cover
Landing Mat "Happy Landing" 600 x 200 x 10 cm with markings
Variants:
"Happy Landing" 600 × 200 × 10 cm with markings
Soft landing mat with PVC-cover and zipper. With white marking lines of the landing zone on the vault.
Mandatory for all FIG competitions.
TECHNICAL DETAILS:
Dimensions: 600 x 200 x 10 cm
Magnesia Stand "Munich"
Well-designed plastic bowl on a metal post with additional storagecompartment.
TECHNICAL DETAILS:
Height: 95 cm;
Color: Silver/White
Mat set "Basic" for Horizontal Bar "Stuttgart"
Variants:
1565827 Mat set "Basic" for Horizontal Bar "Stuttgart"
ORIGINAL REUTHER, FIG certified
4 mats 300 x 200 x 20 cm, 2 mats 300 x 200 x 20 cm with cuts - according to new FIG measurements
The surface is completely made of PVC material and has patented handgrips at the sides making moving and handling of mats very easy. The hand grips also provide necessary air circulation thus ensuring optimal damping during landings. A special latticed polyester material is integrated between the different foam layers to provide longer durability. The edge stabilization at all sides ensures additional safety an also longer durability of the mats. All the mats are supplied with washable anti-slip Bisonyl bottom. The mat cover has the sewed-on Velcro strips at all sides to have a complete landing area when several mats fixed together. To avoid the gaps between mats, there also the covering stripes of the same velour with a thin velcro available. The covering stripes supplied upon request.
Mat Set "Moscow" Horizontal Bar
Variants:
Mat Set "Moscow" Horizontal Bar
4 mats 300 x 200 x 20 cm, 2 mats 300 x 200 x 20 cm with cuts - according to new FIG measurements
ORIGINAL REUTHER, FIG certified
New development in sandwich construction with a core combined of polyether and polyethylene foam. Additional edge stabilization and durable velour surface in spiethblue colour. The cover is made of textile-reinforced PVC material and has patented handgrips at the sides making moving and handling of mats very easy. The hand grips also provide necessary air circulation thus ensuring optimal damping during landings. A special latticed polyester material is integrated between the different foam layers to provide longer durability. The edge stabilization at all sides ensures additional safety an also longer durability of the mats. All the mats are supplied with washable anti-slip Bisonyl bottom. The mat cover has the sewed-on Velcro strips at all sides to have a complete landing area when several mats fixed together. To avoid the gaps between mats, there also the covering stripes of the same velour with a thin velcro available. The covering stripes supplied upon request.
Safety Spotter Mat "Happy Landing"
Soft filling and comfortable soft cover made of comfortable fabric. Particularly suitable for spotting flight elements on Uneven Bars and Horizontal Bar. Two handles on the short side of the mats allow a fast slide in and out during flight elements.
TECHNICAL DETAILS:
Dimensions: 200 x 100 x 12 cm
Trainer Support for High Bar and Rings 100 x 75 x 75 cm
Variants:
Trainer Support for High Bar and Rings 100 x 75 x 75 cm
Hard foam block with additional reinforcement of standing area. Can be used as a trainer platform as well as a platform for gymnasts to prepare the apparatus.
Useful training aid for Horizontal bar, Rings
Break-proof Horizontal Bar rail
Variants:
Break-proof Horizontal Bar rail
A unique construction with an additionally built-in steel cable allowing the horizontal bar to stay in consistent tension even if the bar itself breaks down
Horizontal Bar "Club"
Height adjustment from 60 – 300 cm without loosening the tensioning.
Ideally suited as training bar.
Horizontal Bar "Universal"
ORIGINAL REUTHER. With universal tensioning, height adjustment from 160 - 280 cm in steps of 5 cm. High bar rail made of special stainless steel.
Horizontal Bar Supports
Two floor supports with wide contact area for a better stability. Ideal to learn various exercises and turns in handstand position. Can be used with both uneven bars and horizontal bar rails, enabling them to change quickly through a rapid relief mechanism. Height 40 cm.
No rail (4140705) or bar (2202205/ 2204825) included, need to be ordered separately!
Methodical Horizontal Bar
Training horizontal bar without tensioning system. Quick height adjustment from 45-200 cm. The rail can be replaced by a uneven bars rail of our "Club" series.
For permanent installation in training halls by fixing directly to the floor. Suitable floor anchors for direct installation on concrete are in the scope of the supply.
TECHNICAL DETAILS
Total width incl. floorplate: 284 cm
Width of the rail: 240 cm
Height adjustment: 45 - 200 cm
Horizontal Bar Rail "Universal“
Variants:
Horizontal Bar Rail "Universal“
Suitable for Horizontal Bar "Universal" (art. 1384215)
Landing Mat "Happy Landing" 200 x 200 x 10 cm, canvas cover
Variants:
"Happy Landing" 200 × 200 × 10 cm, canvas cover
Mat with PVC-cover and comfortable elastic canvas cover on top Use for training purposes onlyTECHNICAL DETAILS:Dimensions: 200x200x10 cm
Landing Mat "Happy Landing" 200 x 200 x 5 cm, PVC
Variants:
"Happy Landing" 200 × 200 × 5 cm, PVC
Soft landing mat with PVC-cover and zipper. Available for training use with 5 cm height and according to FIG-Specifications in 10 cm height.
Dimensions: 200 x 200 x 5 cm
Landing Mat "Happy Landing" 300 x 200 x 10 cm, PVC
Variants:
"Happy Landing" 300 × 200 × 10 cm, PVC
Soft landing mat with PVC-cover and zipper.
Dimensions: 300 x 200 x 10 cm
Rail Horizontal Bar "Club"
Variants:
Rail Horizontal Bar "Club"
Rails with this kind of casted end tips are suitable for Uneven Bars "Kombi" (art. 1383128) and "Club" (art. 1383124) Furthermore compatible with training Horizontal Bar "Club" (art. 1384094), methodical Horizontal Bar "Club" (art. 1384224) and Horizontal Bar supports (art. 1384080)
TECHNICAL DETAILS:
Diameter: 28 mm;
Length: 244 cm
Safety Cushion
U-shaped PVC covered safety padding for parallel bars, uneven bars and high bar
with handle on the short side for quick and easy slide
Length:140cm
Safety Cushion Roll
Soft protection roll for uneven bars' or parallel bars' rail. Fixation by means of Velcro. Diameter 8 cm, length 70 cm.
Trainer Platform "Club" for Uneven Bars, 2 pillars
Variants:
Trainerkonsole "Club" für Reck und Stufenbarren mit 2 Füßen
For uneven bars and horizontal bar.
Is not attached to the equipment and does not influence its characteristics. The platform folds up automatically, is adjustable in height with non-slip surface from 137 to 197 cm. Also for use above a landing pit.
The coaching platform must be permanently anchored to the floor. Fixing material for solid wood or concrete floors is included in the scope of delivery. The fixing material cannot be used for elastic sports floors or leveling screed etc.
Size board: 140x50 cm.
Trainer Platform "Club" for Uneven Bars, 4 pillars
Variants:
Trainerkonsole "Club" für Reck und Stufenbarren mit 4 Füßen
Height-adjustable coaching platform 140x50 cm for horizontal bar and uneven bars. Self-retracting mechanism through a gas spring. Freestanding construction with 4 pillars has no impact on the apparatus's features. The stairs can be placed at any side of the platform. Suitable also for landing pits.
The coaching platform must be permanently anchored to the floor. Fixing material for solid wood or concrete floors is included in the scope of delivery. The fixing material cannot be used for elastic sports floors or leveling screed etc
