Freestanding Uneven Bars "Club" with "Fiberflex Pro" rails
Variants:
Freestanding Uneven Bars "Club" with "Fiberflex Pro" rails
The freestanding Uneven Bars "Club" offers simple width adjustment and height adjustment for the low and high rails. It is supplied with SPIETH "Fiberflex Pro" rails and a built-in wheel system. It can be used as a 1-bar module and with the "Club" horizontal bar (4140705). Tensioning is available as an option. Mats can also be ordered as an option.
This parallel bar is NOT suitable as intensive training equipment for higher performance classes.
TECHNICAL DETAILS
- Width adjustment (diagonal): 120 - 210 cm
- Height adjustment low rail: 140 - 190 cm
- Height adjustment for high rail: 215 - 280 cm
- Included bar: Fiberglass rail "Fiberflex Pro".
Horizontal Bar "Club"
Height adjustment from 60 – 300 cm without loosening the tensioning.
Ideally suited as training bar.
Horizontal Bar Supports
Two floor supports with wide contact area for a better stability. Ideal to learn various exercises and turns in handstand position. Can be used with both uneven bars and horizontal bar rails, enabling them to change quickly through a rapid relief mechanism. Height 40 cm.
No rail (4140705) or bar (2202205/ 2204825) included, need to be ordered separately!
Methodical Horizontal Bar
Training horizontal bar without tensioning system. Quick height adjustment from 45 - 200 cm. The rail can be replaced by a uneven bars rail (Art. 2202205).
For permanent installation in training halls by fixing directly to the hall floor. The suitable fixing material must be checked and ordered separately.
It is particularly suitable for children. Not suitable for use in high-level gymnastics!
TECHNICAL DETAILS
Total width: 244 cm
Height adjustment: from 45 - 200 cm
Uneven Bars Rail "Fiberflex Pro Club"
Variants:
Glasfaserholm "Fiberflex Pro CLUB" für Stufenbarren (Stück)
Rails with this kind of casted end tips are suitable for Uneven Bars "Kombi" (art. 1383128) and "Club" (art. 1383124). Furthermore compatible with training Horizontal Bar "Club" (art. 1384094), methodical Horizontal Bar "Club" (art. 1384224) and Horizontal Bar supports (art. 1384080)".
Balance Beam "Club"
Soft training balance beam with special padding and "Vario" height adjustment. This padded beam made of aluminum profile has an additional, softer running surface under the durable synthetic leather than the competition beam. The balance between the softer running surface and the necessary stability is optimally matched. This reduces stress on the joints, minimizes the risk of injury and allows for a higher training frequency. When the height is adjusted, the feet remain in the same position so that the mats do not have to be moved.
TECHNICAL DETAILS:
Length: 5 m
Width of the surface: 10 cm
Height adjustment: 60-130 cm (from 60 - 90 cm with 10 cm increments and from 90-130 cm with 5 cm increments)
Balance Beam Padding "Club" (per piece)
Variants:
Balance Beam Padding "Club"
Padding for Club Balance Beam, per leg
Easily fitted, pre-shaped foam, soft exterior layer
Center Mat "Moscow" for freestanding Uneven Bars "Club"
Variants:
Center Mat "Moscow" for freestanding Uneven Bars "Club"
Measurements: 225x85x20cm incl. frame cut outs
color: spiethblue
Horizontal Bar Rail "Universal“
Variants:
Horizontal Bar Rail "Universal“
Suitable for Horizontal Bar "Universal" (art. 1384215)
Trainer platform "Club"for Rings (short version)
Variants:
1490376 Trainer platform "Club" for Rings (short)
The coaching platform is not attached to the equipment and does not influence the characteristics. It automatically tips up because of the nitrogen gas loaded springs. Height Adjustment with non-slip surface from 137-197 cm in 10 cm steps. Size of Platform: 109,5 x 60 cm.
Uneven Bars Rail "Carboflex Club"
Variants:
Glasfaserholm "Carboflex CLUB" für Stufenbarren (Stück)
Rails with this kind of casted end tips are suitable for Uneven Bars "Kombi" (art. 1383128) and "Club" (art. 1383124) Furthermore compatible with training Horizontal Bar "Club" (art. 1384094), methodical Horizontal Bar "Club" (art. 1384224) and Horizontal Bar supports (art. 1384080)"
Vaulting Table "Ergojet Club"
A push-off area like at the competition vaulting table of approx. 95 x 120 cm. Easy adjustment of height by means of gas-loaded spring in steps of 5 cm from 90 to 135 cm. The cover is made of hygroscopic synthetic leather and is fixed on the upper part of the vaulting table by means of Velcro, that assures its easy replacement. Including integrated transportation wheels and protective padding of pillars.
