Brick S Kit
The S kit consists of a Low Bone, a High Bone, a Precision Ledge, a Precision Bar and two connecting bars (2m handrails). It is particularly suitable for the practice of beginners, the youngest and uninitiated audiences. The components of this kit allow you to practice basic technical movements of Parkour and Parkour Freestyle.
Example of configuration of the S Kit (right hand image)
This configuration allows you to perfect your crossing techniques but also your balance thanks to the connecting bars and the precision beams.
handrail 2m x 2
Brick M Kit
The M kit consists of an Inclined Wall, a Low Bone, a High Bone, a Precision Ledge, a Precision Bar and a connection bar (2m handrail). The M Kit is suitable for practice of tracers already initiated and wishing to improve.
Example of configuration of the M Kit (right hand image)
In this form, the M kit offers additional options in terms of evolution for the tracer. The level of performance possibilities also increases with the Inclined Wall module. This configuration allows more connections and jumps between the different modules.
Brick L Kit
The L kit consists of a Tower, an Inclined Wall, a Low Bone, a High Bone, a Precision Ledge, two Precision Bars and two connection bars (2m handrails). These modules present a higher level of difficulty and are intended for athletes who are moving towards an experienced, even competitive practice.
Example of configuration of the L Kit (right hand image)
In this lengthwise setting, it offers space and a multitude of movements and crossings, allowing for example timed races. This kit also offers a fairly wide range of modules of different sizes and shapes for high level Parkour Freestyle training.
Brick Stangenmodul S, inkl. Holzteile
The Small square-shaped Tubular Structure is most suitable for beginners and small spaces. It is made up of four Wood Pilars and a Wood Facade, and allows back and forth movements between the two elements.
incl wooden parts: pipe+ 4 Pilars+ 1 wood facade
200x253x235 cm
Brick Stangenmodul M, inkl. Holzteile
The Medium Tubular Structure offers greater possibilities thanks to the presence of six Wood Pilars and two Wood Facades. The back and forth movements are therefore more complete.
Dimensions: 200 x 400 x 235 cm
Bestehend aus:
1 x Pipe
6 x Pilars
2 x Wood facade
Brick Stangenmodul L inkl. Holzteile
The Large Tubular Structure is the most advanced structure with the presence of eight Wood Pilars and two Wood Facades. Suitable for large spaces and advanced competition, this structure offers you training possibilities that will help you progress quickly. It is totally adaptable to outdoor practice.
Dimension: 200x400x235 cm
Consists of:
1 x Pipe
8 x Pilars (90 & 180)
2 x Wood Facade
Brick Donjon inkl. Guard Rail
The Donjon module is a station that can be used as a platform to facilitate the momentum for moving from one element to another. There are ridges at the corners that can incorporate bars
in different directions and also allow for a ticking motion.
Brick High Tower
The High Tower, higher than the Tower, is a module that can be used in particular as a junction between the other modules. Add a Precision Bar between the High Tower and High Wall modules, and you will get a new configuration for your workouts.
Brick High Wall
Similar to the Wall, the High Wall is a slightly higher crossing obstacle, which is one of the components of the High Bone module. Acquired separately, it allows you to compose a training area with more possibilities by connecting it to other modules.
Brick Inclined Wall
The Inclined Wall is assembled to form a slope that can be crossed vertically or horizontally. The combination with other modules is done by a system of clips or the addition of an accessory. For example, if you associate the Inclined Wall with the Donjon module, it will then serve as a support to take a leap and allow you to climb the height of the Donjon module.
Brick L Wall
The L Wall is a non-linear obstacle that usually makes up the L module. Its difference in depth allows it to be combined with several other modules
and accessories.
Brick L Wall + Trapeze
Similar to urban landscapes, the L Module consists of two walls forming a right angle. It incorporates into your training areas giving more possibilities for tricks and Parkour techniques.
One of the walls is slightly sloped.
Brick Precision Beam
The Precision Beam teaches you how to lock your landings when crossing. Its narrow surface is reminiscent of the thin walls and other obstacles found in an urban landscape. The beam can clip to the other modules to form a link between them.
Brick Top Very High Wall
The Top Very High Wall is a module that allows you to increase the height of your other modules. Place it over the Very High Wall to increase its height.
Brick Trapeze Wall
The Trapeze is a slightly sloped obstacle which usually makes up the L module. It can be incorporated as you wish into your training areas. The inclination can be an asset for sequences of tricks.
Brick Wall
The Wall corresponds to a low crossing obstacle, which is one of the components of the Low Bone module. Acquired separately, it allows you to compose a training area with more possibilities by connecting it to other modules.
Brick Precision Bar, 1 m Handrail
The Precision Bar can be used as a crossing obstacle or to practice the movement of the pendulum.
Whatever your choice, this bar is removable at the ends. In this way, you can attach it to two other modules, like inserting it between a Wall and a Tower.
Brick Precision Ledge
The precision ledge is intended for practitioners wishing to
train their balance.
It consists of three elements which are the studs and the beam, once separated it constitutes 3 modules to work the precision jump. The precision ledge can be coupled to one or more bars to create a complete precision path.
Dimension: 169 x 66 x 20 cm
Consists of:
2 x Stud
1 x Precision Beam
Brick High Bone
The High Bone module, simple and quick to install, easily integrates into the configuration of your Parkour training areas. It is suitable for overcoming obstacles with a stylized design allowing new possibilities for the discipline. Separable into three parts, the High Bone can be arranged differently and allow the creation of a new obstacle.
Brick Low Bone
The Low Bone module is made up of two Towers and a Wall. It also easily adapts to your sports set-ups. With a relatively low height, the basic exercises are easier to learn. Split into three parts, the Low Bone can be assembled differently to form a new obstacle.
If you want a higher module, discover the High Bone.
Brick Stud
The Stud is a module that can be used as a support for the Precision Bar. You can buy just one and place the Handrail between the Stud and another module, or order them in two.