Tension Control System (TCS) with NiMH batteries (AA)
FIG certified.
The new Tension Control System (TCS) with rechargeable NiMH batteries (AA).
It prevents from too low or too high tensioning of an apparatus thanks to the digital display.
When tensioning becomes too low or too high it is shown by means of a flashing light signal. Guarantees same tension characteristics of an apparatus and is quick to set up for athletes & coaches.
Supplied in a solid plastic case. Equipped with flashing light and start button. Displays the battery level + and the voltage in N. The device gives the tension in Newton a range from 0 N to 10.000 N with increments of 100.
Per one tensioned gymnastic apparatus is one tensioning measuring device necessary.
"Dynamoflex Pro" rail for Parallel Bars, one piece
FIG-certified competition rail "Dynamoflex Pro" for parallel bars "Melbourne" and "Melbourne Pro". Also suitable for other parallel bars, but then without FIG certification. Pre-drilled for quick and easy assembly.
The fiberglass rails enable optimal vertical dynamics for gymnastic elements between the rails and at the same time have high horizontal stability for elements performed sideways on one rail. The unique pre-tension of rails offers gymnasts great dynamics for flight elements and simultaneously reduces impact forces of landings on the arms. The natural fiber veneer provides excellent grip even when new, reduces magnesia consumption and shortens preparation time. Additionally, it extends the lifespan of the rail-surface even under high usage intensity.
The rails may only be replaced in pairs in order to maintain the device properties and safety.
Lengths 350 cm.
Parallel Bars "Melbourne Pro" with integrated wheel system
FIG-certified competition parallel bars "Melbourne Pro" with innovative "Dynamoflex®Pro" fiberglass rails enable optimal vertical dynamics for gymnastic elements between the rails and at the same time have high horizontal stability for elements performed sideways on one rail. The unique pre-tension of rails offers gymnasts great dynamics for flight elements and simultaneously reduces impact forces of landings on the arms. The natural fiber veneer provides excellent grip even when new, reduces magnesia consumption and shortens preparation time. Additionally, it extends the lifespan of the rail-surface even under high usage intensity.
The stepless width adjustment with measuring scale enables quick and repeatable individual adjustment of the parallel bars. Thanks to the integrated wheel system, the parallel bar can be placed on floor-friendly rubber wheels and moved to the desired position in just a few simple steps.
TECHNICAL DETAILS
- Height adjustment: from 160-210 cm in 5 cm increments
- Competition height according to FIG standard: position 9
- Stepless width adjustment: from 41-71 cm
Parallel Bars "Melbourne Pro" without integrated wheel system
FIG-certified competition parallel bars "Melbourne Pro" with innovative "Dynamoflex®Pro" fiberglass rails enable optimal vertical dynamics for gymnastic elements between the rails and at the same time have high horizontal stability for elements performed sideways on one rail. The unique pre-tension of rails offers gymnasts great dynamics for flight elements and simultaneously reduces impact forces of landings on the arms. The natural fiber veneer provides excellent grip even when new, reduces magnesia consumption and shortens preparation time. Additionally, it extends the lifespan of the rail-surface even under high usage intensity.
The stepless width adjustment with measuring scale enables quick and repeatable individual adjustment of the parallel bars. Transport trolleys (art. 1404016) are available as an option. If the parallel bar needs to be moved frequently to different locations, the version with integrated wheel system is recommended (art. 1403120).
TECHNICAL DETAILS
- Height adjustment: from 160-210 cm in 5 cm increments
- Competition height according to FIG standard: position 9
- Stepless width adjustment: from 41-71 cm
Tumbling Track "SPIETHway Evolution" - 25,20 m
The new FIG-certified tumbling track is now available! The consistent further development of the proven "SPIETHway" series offers the optimal combination between maximum rebound effect for the most demanding tumbling elements and damping of the unwanted force peaks to protect the joints both in training and in competition.
The overlying rollable mat composite with durable needlefelt surface in combination with an integrated mesh fabric ensures longer durability even during intensive use.
Metal connectors with "QuickConnect" system guarantee a stable connection of the individual elements while minimizing set-up and dismantling times during events.
The track is also proven as training equipment for artistic gymnastics and acrobatics. Tumbling tracks in inidiviudal lenghts are available upon request, for example for permanent installation in gymnastics centers. A suitable run-up track and landing area are available separately.
TECHNICAL DETAILS
- 21 steel frame single elements, 120 x 200 cm
- glassfiber spring system with pressure distribution plates
- anti-slip rubber feet
- total height: approx. 30 cm
- total length: 25,20 m
Uneven Bars "Munich"
FIG-certified, ORIGINAL REUTHER
The competition Uneven Bars with new linen rails "Fiberflex Pro" and a new built-in height adjustment system. New standard heights according to the current FIG standard: low rail 175 cm, high rail 255 cm.
With a new built-in height adjustment system in the uprights. By pushing the locking pins the height can be adjusted e.g. for tall gymnasts (at high upright in combination with a knob). An adaption of the tensioning is mandatory.
With patented double tension system including 2 slide adjusters providing the individual fine turning of tension.
Adjustments: low rail from 150 to 200 cm, high rail from 230 to 280 cm, distance between the rails max. 195 cm.
TECHNICAL DETAILS
Height adjustment low bar: 150 - 200 cm;
Height adjustment high bar: 230 - 280 cm;
Distance between bars: 110 - 195 cm;
Balance Beam "Soft Touch"
The revolutionary new SPIETH ‘Soft Touch’ technology features a unique combination of landings
with a ‘Soft Touch’ and superior stability.
With the new “Soft Touch” technology, the balance beam keeps its well-known stability to perform pirouettes, jumps and sidewards landings. At the same time there is considerably
lower impact on the joints with the ‘Soft Touch’ landing, especially for landings on both legs for gymnastic and acrobatic elements.
Meet the best of 2 worlds – optimal grip and landings with reduced impact on athletes’ joints, during long trainings.
A new innovative shape of the aluminium profile makes the balance beam appear optically wider, which makes it more comfortable for the gymnasts to train and compete on it.
TECHNICAL DETAILS:
Length: 5 m
Width of the surface: 10 cm
Height adjustment: from 75 to 125 cm, with 5 cm increments
available in 3-4 weeks
Elastic Swingfloor "Moscow" 14x14 m
Variants:
Schwingboden "Moskau" 14x14 m - montiert
FIG-certified, ORIGINAL REUTHER
Top competition Free Exercise Swing floor with a new Spring & Security System that causes a maximum rebound effect.
Sub-construction made of:
74 pcs. of 15 mm high waterproof plywood sections.
The floor is equipped with 2.336 high quality tempered steel springs.
The sub-construction is covered by:
196 puzzle shaped foam plates (5 cm high) with special foam covered with needle fleece (2 cm high) and 7 floor mats 14m x 2m x 20mm.
The layer of special high quality foam contributes to optimized rebound effects.
Mats are linked together by 6 “Duo Velcro” straps.
4 white straps are available for marking the competition area.
Total size: 14x14m
Total height: 20 cm
Horizontal Bar "Stuttgart"
FIG-certified. ORIGINAL REUTHER.
Upright with more elasticity. Height adjustment from 265 - 310 cm anti-fracture safety bar made of high quality special stainless steel, for highest standard and safety. The double tensioning with the licensed key adjustment gives excellent support and flexibility to the apparatus.
available in 3-4 weeks
Pommel Horse
FIG certified, ORIGINAL REUTHER
Aluminium pommels. 2 leg system with drag - chain and leather cover. Hight adjustment from 95 to 125 cm. With built-in transportation item.
Ring Frame "Berlin"
FIG certified, ORIGINAL REUTHER
Built-in shock absorbers and additional special spring system reduce the jolt on the joints and also the peak forces. Safety frame made of square steel tubing with individual components with a maximum length of 2 m for easy transportation. Height adjustment in steps of 5 cm from 595 - 625 cm (overall height). Ring height adjustable in 2,5 and 5 cm increments between 275 - 305 cm (275 - 280 cm per 5 cm, 280 - 290 cm per 2,5 cm, 295 - 305 cm per 5 cm). The plastic-encased ropes for rings are attached by means of variable threaded sockets with a fine adjustment. Double cable tension system together with the licensed key-adjustment provide the device with great stability.
Vaulting Table "Ergojet Rio"
FIG certified; ORIGINAL REUTHER
Further developed spring system provides an improved resilience and an optimized stability at the middle and the back end of the surface.
Height adjustment with gas springs from 100 - 140 cm in increments of 5 cm. Surface consisting of 2-fold fiberglass reinforced plastic and an integrated resilience system. High Padding for great safety.
Transport system is included.
Weight without safety padding: 135 kg
Floor surface required: 110 x 94 cm
Balance Beam Padding "Competition" (per piece)
Variants:
Wettkampf-Schutzpolster für "Soft Touch"-Balken (Stück)
• Safety padding for competition Balance Beam "Soft Touch"
• Mandatory at FIG competition
• Preshaped foam
• Soft needle felt top layer
• Easy to fit with Velcro
• 2 pieces are necessary for one competition Balance Beam
Hand Safety Mat
According to FIG rules. Especially for vault to protect the wrists during round-off entries.
TECHNICAL DETAILS:
Dimensions: 120 x 100 x 3 cm
Hook for Rings
Lightweight aluminum hook rod.
Use for quick and easy untangling and positioning of the rings.
Length: 190 cm
Landing Mat "Happy Landing" 200 x 200 x 10 cm, PVC
Variants:
Landematte "Happy Landing" 200x200x10cm, PVC Bezug
Soft landing mat with PVC-cover and zipper. Available for training use with 5 cm height and according to FIG specifications in 10 cm height.
Dimensions: 200 x 200 x 10 cm
Magnesia holder for feet
Wooden square tray for use at vault and floor excercises. Reduces the consumption of magnesia and simplifies the preparation. It is equipped with Velcro at the bottom for fixation. Two holders are required for one floor during the competition.
TECHNICAL DETAILS:
Dimensions: 50 x 50 cm
Magnesia Stand "Munich"
Well-designed plastic bowl on a metal post with additional storagecompartment.
TECHNICAL DETAILS:
Height: 95 cm;
Color: Silver/White
Mat Set "Basic" for Vault - International
Variants:
1565808 Mat Set "Basic" for Vault - International
ORIGINAL REUTHER, FIG-certified
3 mats 300 x 200 x 20 cm and 2 protection padding for the base
The surface is completely made of PVC material and has patented handgrips at the sides making moving and handling of mats very easy. The hand grips also provide necessary air circulation thus ensuring optimal damping during landings.
Mat Set "Moscow" Vault - National
Variants:
Mat Set "Moscow" Vault - National
ORIGINAL REUTHER - FIG certified
3 landing mats 250 x 200 x 20 cm plus 2 upolstery mats each 55 x 100 x 20 cm;
color: spieth-blue; dimension: 600 x 250 x 20 cm
Rondat Mat long
Safety mat to protect from injuries resulting from overstepping the spring board during round-off vaults. Surrounds the springboard completely on 3 sides. The front is 20 cm high according to the new FIG apparatus norms.
Run-Up and Jumping Device
ORIGINAL REUTHER
Original Reuther
Consisting of a run-up track made of special foam material with high-quality needle fleece "Triflex", a non-slip support for the springboard as well as a jumping device for the vaulting table with passage for the tensioning chain. The three parts are securely connected to each other by means of Velcro.
The scope of delivery includes a roll-up core and a measuring tape.
Exclusive springboard.
TECHNICAL DETAILS:
Total length: 25 m;
Color: spiethblue;
Run-up track: 100 cm width, 25 mm height, 23,10m length;
Jumping device for springboard: 244 cm long
Jumping device for vaulting table: 199 cm long
Total length 25 m. Colour spieth-blue
available in 1-2 weeks
Safety Spotter Mat "Happy Landing"
Soft filling and comfortable soft cover made of comfortable fabric. Particularly suitable for spotting flight elements on Uneven Bars and Horizontal Bar. Two handles on the short side of the mats allow a fast slide in and out during flight elements.
TECHNICAL DETAILS:
Dimensions: 200 x 100 x 12 cm
Springboard "Moscow 8"
Variants:
1411714 Springboard "Moscow 8"
Newest competition springboard. FIG-certified.
Equipped with revolutionary “Whisper Spring System”. With improved dynamic properties of the springboard’s lower end. Carefully and precisely calculated positions of 8 conical tempered steel springs, passivized with golden color. Surface is made of hybrid carbon fiber sandwich, with 20mm high density foam and with comfortable long-lasting needle fleece.
TECHNICAL DETAILS:
Color top layer: orange
Color springs: gold
Body weight: 50 - 100 kg
