Vaulting Table "Ergojet Rio"
FIG certified; ORIGINAL REUTHER
Further developed spring system provides an improved resilience and an optimized stability at the middle and the back end of the surface.
Height adjustment with gas springs from 100 - 140 cm in increments of 5 cm. Surface consisting of 2-fold fiberglass reinforced plastic and an integrated resilience system. High Padding for great safety.
Transport system is included.
Weight without safety padding: 135 kg
Floor surface required: 110 x 94 cm
Hand Safety Mat
According to FIG rules. Especially for vault to protect the wrists during round-off entries.
TECHNICAL DETAILS:
Dimensions: 120 x 100 x 3 cm
Landing Mat "Happy Landing" 200 x 200 x 10 cm, canvas cover
Variants:
Landing Mat "Happy Landing" 200 x 200 x 10 cm, canvas cover
Mat with PVC-cover and comfortable elastic canvas cover on top Use for training purposes onlyTECHNICAL DETAILS:Dimensions: 200x200x10 cm
Magnesia holder for feet
Wooden square tray for use at vault and floor excercises. Reduces the consumption of magnesia and simplifies the preparation. It is equipped with Velcro at the bottom for fixation. Two holders are required for one floor during the competition.
TECHNICAL DETAILS:
Dimensions: 50 x 50 cm
Magnesia Stand "Munich"
Well-designed plastic bowl on a metal post with additional storagecompartment.
TECHNICAL DETAILS:
Height: 95 cm;
Color: Silver/White
Mat Set "Basic" for Vault - International
Variants:
1565808 Mat Set "Basic" for Vault - International
ORIGINAL REUTHER, FIG-certified
3 mats 300 x 200 x 20 cm and 2 protection padding for the base
The surface is completely made of PVC material and has patented handgrips at the sides making moving and handling of mats very easy. The hand grips also provide necessary air circulation thus ensuring optimal damping during landings.
Mat Set "Moscow" Vault - National
Variants:
Mat Set "Moscow" Vault - National
ORIGINAL REUTHER - FIG certified
3 landing mats 250 x 200 x 20 cm plus 2 upolstery mats each 55 x 100 x 20 cm;
color: spieth-blue; dimension: 600 x 250 x 20 cm
Rondat Mat long
Safety mat to protect from injuries resulting from overstepping the spring board during round-off vaults. Surrounds the springboard completely on 3 sides. The front is 20 cm high according to the new FIG apparatus norms.
Run-Up and Jumping Device
ORIGINAL REUTHER
Original Reuther
Consisting of a run-up track made of special foam material with high-quality needle fleece "Triflex", a non-slip support for the springboard as well as a jumping device for the vaulting table with passage for the tensioning chain. The three parts are securely connected to each other by means of Velcro.
The scope of delivery includes a roll-up core and a measuring tape.
Exclusive springboard.
TECHNICAL DETAILS:
Total length: 25 m;
Color: spiethblue;
Run-up track: 100 cm width, 25 mm height, 23,10m length;
Jumping device for springboard: 244 cm long
Jumping device for vaulting table: 199 cm long
Total length 25 m. Colour spieth-blue
available in 1-2 weeks
Springboard "Moscow 8"
Variants:
1411714 Springboard "Moscow 8"
Newest competition springboard. FIG-certified.
Equipped with revolutionary “Whisper Spring System”. With improved dynamic properties of the springboard’s lower end. Carefully and precisely calculated positions of 8 conical tempered steel springs, passivized with golden color. Surface is made of hybrid carbon fiber sandwich, with 20mm high density foam and with comfortable long-lasting needle fleece.
TECHNICAL DETAILS:
Color top layer: orange
Color springs: gold
Body weight: 50 - 100 kg
Fleece for "Ergojet Rio"
Variants:
Überzug für Sprungtisch "Ergojet" und "Ergojet Rio"
Fleece cover with integrated belt system for fixation. Protects the vaulting table from wear and covers smaller damages on the surface.
PVC-Cover Balance Beam
Variants:
PVC-Schutzüberzug für Schwebebalken 5m (blau)
This cover is against dust and offers protection during transport and storage.
• Quick and easy to fit with velcro.
• For a balance beam with the length 5 m
• One cover is needed per beam.
2-part Vaulting Box soft
Soft vaulting box consisting of 2 elements.
• Dimensions upper module: 160 x 80 x 20 cm
• Dimensions lower module: 160 x 80 x 100 cm
• Anti-slip-material on bottom side
• Including 2 carrying handles
Foam Density 23kg/ m3
available in 3-4 weeks
Fleece Cover for "Pegases"
Variants:
Überzug für Sprungtisch "Pegases" und "Ergojet Club"
Fleece cover to protect the vaulting table from wear and covers smaller damages on the surface.
Measuring tape 30 m for the vault run-up
Measuring tape with practical handle and retractable crank.
Front measurement in cm, back measurement in ft.
Length: 30 m / 100 ft
Rondat Mat short
According to FIG rules.
Safety mat to protect from injuries resulting from overstepping the springboard during round-off vaults. Surrounds the spring board on 3 sides. The front is 20 high according to the new FIG apparatus norms (mandatory for all FIG competitions).
Material: High-density foam with a reinforced PVC-cover.
TECHNICAL DETAILS:
Dimensions: 120 x 102 x 22 cm
Run-up Track
25 m run-up track without jumping device made of 25 mm thick "Triflex" with roll-up core.
TECHNICAL DETAILS:
Dimensions: 25 x 1 m;
Thick: 25 mm
Springboard "Budapest"
ORIGINAL REUTHER.
Springboard with additional rubber sections for higher elasticity. High-performance springboard with very strong springs.
Size: 120 x 60 x 21 cm
Trapezoid Box Soft
Large trapezoid vaulting box consisting of 4 elements. The modules are connected with Velcro and therefore a simple height adjustment is possible.
Each section consists of dual-density foam, in which a harder area at the top ensures stability.
• Possible heights: 30, 60, 90, 120 cm
• Including carrying handles
• PVC-cover, anti-slip material at the bottom side
• Dimensions of the modules:
A: 120 x 52,20/40 x 30 cm
B: 120 x 65/52,50 x 30 cm
C: 120 x 77,50/65 x 30 cm
D: 120 x 90/77,50 x 30 cm
Variable Vaulting Box Soft
Soft vaulting box consisting of 6 elements. The modules are connected with Velco and therefore a simple height adjustment is possible.
• Possible heights: 70, 90, 100, 110, 120 and 140cm
• Including carrying handles
• PVC-cover, anti-slip material at the bottom side
Consisting of following modules:
A: Rounded module 150 x 50 x 30 cm
B: Intermediate modules 120/90/60/30 x 50 x 20 cm
C: Base module 150 x 80/50x 70 cm
Foam density 30 kg/ m3
Vaulting Table "Ergojet Club"
A push-off area like at the competition vaulting table of approx. 95 x 120 cm. Easy adjustment of height by means of gas-loaded spring in steps of 5 cm from 90 to 135 cm. The cover is made of hygroscopic synthetic leather and is fixed on the upper part of the vaulting table by means of Velcro, that assures its easy replacement. Including integrated transportation wheels and protective padding of pillars.
Vaulting Table "Ergojet Junior"
Mini-Vaulting Table for children and teenager
Ergonomical shape and large surface
Shock-absorbing and resilient foam core
Quick and easy height adjustment
Sturdy hard-wearing rubber caps
Fine adjustment and castors included
Height adjustable between 85 - 135 cm
Vaulting Table Foam
Made of hard foam with PVC coating. Divided into 3 parts: 2 module parts are 25 cm and 50 cm high and one is semi-circular and 50 cm high, which is adapted to the shape of a jumping table top.The top surface is made of anti-slip artificial leather. All parts are connected with Velcro.
TECHNICAL DETAILS:
Base: 90x75 cm
Overall height is variable: 50, 75, 100, 125 cm
