"Ergojet Rio" service kit (height adjustment)
Service-Kit for the height adjustment of all versions of Vaulting Table "Ergojet Rio".
Includes:
- Clamping lever M16x40, FIG-conform
- Clamping band M16
- Further small components
- Suitable Allen-key
- Manual
Balance Beam Cover 5 m
This balance beam cover with original “Soft Touch” leather is a practical way to extend the life of your balance beam and cover minor damage to the original padding.
Easy to attach and remove. The existing padding is not damaged in the process. Suitable for “Club” and “Soft Touch” balance beams with a length of 5 m. The cover is attached with hook-and loop tape, allowing the tension of the cover to be adjusted optimally.
Endkappe Schwebebalkenfuß alt, Alu+Holz, geriffelt
Grey end cap for balance beam feet. Currugated surface, inner diameter 55mm.
Federelement 70x70x105 mm GRAU-WEIß für Boden "Stuttgart"
Grey-white replacement spring element for Swing Floor "Stuttgart".
Hot glue adhesive needs to be ordered separately.
Dimensions: 70x70x105 mm.
Federelement 80x80x105 mm GRAU-WEIß für TB "Stuttgart"
Grey-white replacement spring element for Tumbling Track "Stuttgart".
Hot glue adhesive needs to be ordered separately.
Dimensions: 80x80x105 mm.
Federelement SCHWARZ für Schwingboden und TB "Stuttgart"
Black replacement spring element für Swing Floor "Stuttgart" and Tumbling Track "Stuttgart".
Hot glue adhesive needs to be ordered separately.
Dimensions: 48x105x105 mm.
Hot glue stick, piece
Glue stick, 11 mm diameter, transparent for hot glue guns. Suitable glue stick for glueing the spring elements for the Stuttgart tumbling track/floor. One glue stick is sufficient for approx. 3 individual spring elements.
The processing and gluing properties of “commercially available,” less expensive hot glue sticks can vary significantly.
Integrierte Fahreinrichtung "Ergojet" - 1 Rolle LINKS
incl. yellow metal bracket, transport roller and screw set for fastening
(front left and rear right - seen from the front)
Integrierte Fahreinrichtung "Ergojet" - 1 Rolle RECHTS
incl. yellow metal bracket, transport roller and screw set for fastening
(front right and rear left - seen from the front)
Schichtholz-Holm Männerbarren mit GFK-Einlage (Paar)
Original Reuther
Mit 3-facher Glasfasereinlage, Vorspannung und vorgebohrten Löcher. Kann nur paarweise getauscht werden. Passend für den Wettkampf-Männerbarren "Champion Stuttgart" ab Baujahr 03/2012.
Pro Paar. Länge 350 cm.
Service-Kit für Klemmkopf MäBa "Melbourne (Pro)"
Includes:
- Clamping head
- Trapezoidal threaded bolt and nuts left/right
- Clamping lever
- Fastening material
Slide Adjuster
ORIGINAL REUTHER
For individual fine tuning of the apparatus's tension. Easy to loosen and to fix thanks to the special slide mechanism.
Transportrolle Ø100x30mm Sprungtisch Ergojet & Just For Kids
Nicht kompatibel mit Sprungtisch "Ergojet Rio"
Trapezgewindebolzen 6-kant universal Tr16x4
Suitable for the men's bars "Melbourne (Pro)" and "Champion Stuttgart" (only for the newer version with hexagonal trapezoidal threaded bolt; bordeaux-red or silver).
Velcro 150mm spiethblue, per meter
Variants:
lfm. Flausch-Klettband 14 cm breit - spiethblau
For covering the edges between landing mats. (1 roll = 50 running meters)
Velcro 96mm spiethblue, 14 meter
Variants:
Flausch/Haken Klettband 96mm breit, 14m lang-spiethblau Stk.
Hook and loop tape preassembled to 14 m for connecting the Swing Floor "Moscow" rollable mats.
TECHNICAL DETAILS:
Width: 96 mm;
Length: 14 m;
Colour: spiethblue
Velcro 96mm spiethblue, per meter
Variants:
lfm. Flausch-Klettband 96 mm breit - spiethblau
Spiethblue hook and loop tape e.g. for connecting rollable mats or landing mats.
TECHNICAL DETAILS:
Width: 96 mm;
Colour: spiethblue;
Maximum length in one piece: 43 m = 1 roll
Please order in meter (If you need 12 m, please order 12 pieces)
