Rail for plug-in frame / square fork (90 mm/225.5 cm)
Variants:
2511369 Horizontal Bar rail / square fork (90 mm/225.5 cm)
Rail with fork ends, suitable for 90 mm rectangular profiles. Centre-to-centre distance 225.5 cm, including screw cap and safety washer. Horizontal bar made from rolled and hardened special steel, diameter 28 mm. Ground and polished to ISO 286/2 ITh9. Hardness tested to DIN EN ISO 6506-1. Please note: This item is a custom-made product. In accordance with Section 312g(2)(1) of the German Civil Code (BGB), there is no right of withdrawal for custom-made products. If you are unsure when placing your order, please send us the completed measurement sheet before ordering. Our customer service team will then contact you.
Rail Horizontal Bar "Club"
Variants:
Rail Horizontal Bar "Club"
Rails with this kind of casted end tips are suitable for Uneven Bars "Kombi" (art. 1383128) and "Club" (art. 1383124) Furthermore compatible with training Horizontal Bar "Club" (art. 1384094), methodical Horizontal Bar "Club" (art. 1384224) and Horizontal Bar supports (art. 1384080)
TECHNICAL DETAILS:
Diameter: 28 mm;
Length: 244 cm
Repair Cover Balance Beam "Barcelona"
This cover is a handy alternative to prolong the use of your existing balance beam and to cover up smaller damages in the upholstery.
Easy to put on, suitable for all 5m balance beams.
Repair Set
• To repair small damages to airtracks or airproducts.
1 orange box with :
1 glue, 1 grey valve key, 1 blue PVC patch, 1 grey PVC patch
RG-Measuring table
To control all RG-aparatuses according to FIG-specifications
• Made of wood
• With scale
• Required in official competitions
• For all RG-apparatuses
Rondat Mat short
According to FIG rules.
Safety mat to protect from injuries resulting from overstepping the springboard during round-off vaults. Surrounds the spring board on 3 sides. The front is 20 high according to the new FIG apparatus norms (mandatory for all FIG competitions).
Material: High-density foam with a reinforced PVC-cover.
TECHNICAL DETAILS:
Dimensions: 120 x 102 x 22 cm
Run-up Track
25 m run-up track without jumping device made of 25 mm thick "Triflex" with roll-up core.
TECHNICAL DETAILS:
Dimensions: 25 x 1 m;
Thick: 25 mm
Run-up track without roll-up core
Run-up track with 25 m length. Without take-off system.
Top side made of spieth-blue needlefelt. Anti-slip surface on the underside.
Safety Cushion
U-shaped PVC covered safety padding for parallel bars, uneven bars and high bar
with handle on the short side for quick and easy slide
Length:140cm
Safety Cushion Roll
Soft protection roll for uneven bars' or parallel bars' rail. Fixation by means of Velcro. Diameter 8 cm, length 70 cm.
Safety padding for High Bar "Stuttgart"
Competition safety padding for High Bar "Stuttgart". Per piece (2 pieces necessary per High Bar)
Safety padding for Parallel Bars (per piece)
Competition protective padding, sold individually, for men's parallel bars
"Stuttgart" and "Melbourne".
Easy to fit.
Four pieces are required per pair of men's parallel bars.
Safety padding for Ring Frame
For the competition ring frame (Art. 1384034). Per piece, 2 pieces are needed for one competition ring frame.
Safety padding for Uneven Bars
For the competition Uneven Bars (Art. 1383105), consisting of 1 piece. 4 pieces are needed for one Uneven Bars in accordance with the latest FIG guidelines.
Schichtholz-Holm Männerbarren mit GFK-Einlage (Paar)
Original Reuther
Mit 3-facher Glasfasereinlage, Vorspannung und vorgebohrten Löcher. Kann nur paarweise getauscht werden. Passend für den Wettkampf-Männerbarren "Champion Stuttgart" ab Baujahr 03/2012.
Pro Paar. Länge 350 cm.
Senior Somersault Belt Ø 38 cm, 80 - 108 cm
Variants:
Somersault Belt Ø 38 cm, 80 - 108 cm
The fixed ring and belt upholstery increase stability of hip. Ball bearings are attached to the ring to facilitate rotatory movements. The somersault belt consists of wide-upholstered quick adjustable synthetic belt with easy-lock and removable leg loops.
Service-Kit für Klemmkopf MäBa "Melbourne (Pro)"
Includes:
- Clamping head
- Trapezoidal threaded bolt and nuts left/right
- Clamping lever
- Fastening material
Slide Adjuster
ORIGINAL REUTHER
For individual fine tuning of the apparatus's tension. Easy to loosen and to fix thanks to the special slide mechanism.
SPIETH Maintenance and Service Spray
Content: 400 ml.
The sprayable grease is suitable for lubrication of metal parts on SPIETH apparatuses.
The SPIETH maintenance and service spray is a high quality fully synthetic lubricating medium. Regular care of the metal parts help to prolongen the period of use and keep the characteristics of the aparatuses.
Trainer Platform "Club" for Rings (long)
Variants:
1490372 Trainer Platform "Club" for Rings (long verison)
The coaching platform is not attached to the equipment and does not influence the characteristics. It automatically tips up because of the nitrogen gas loaded springs. Height Adjustment with non-slip surface from 137-197 cm. Size of Platform: 135x45 cm.
The coaching platform must be permanently anchored to the floor. Fixing material for solid wood or concrete floors is included in the scope of delivery. The fixing material cannot be used for elastic sports floors or leveling screed etc.
Trainer Platform "Club" for Uneven Bars, 2 pillars
Variants:
Trainerkonsole "Club" für Reck und Stufenbarren mit 2 Füßen
For uneven bars and horizontal bar.
Is not attached to the equipment and does not influence its characteristics. The platform folds up automatically, is adjustable in height with non-slip surface from 137 to 197 cm. Also for use above a landing pit.
The coaching platform must be permanently anchored to the floor. Fixing material for solid wood or concrete floors is included in the scope of delivery. The fixing material cannot be used for elastic sports floors or leveling screed etc.
Size board: 140x50 cm.
