- WELCOME TO OUR BRAND NEW WEBSITE
Menu
Filter
–
Uneven Bars Rail "Carboflex Club"
Variants:
Uneven Bars Rail "Carboflex Club"
Rails with this kind of casted end tips are suitable for Uneven Bars "Kombi" (art. 1383128) and "Club" (art. 1383124)
Furthermore compatible with training Horizontal Bar "Club" (art. 1384094), methodical Horizontal Bar "Club" (art. 1384224) and Horizontal Bar supports (art. 1384080)"
Methodical Horizontal Bar
Simple to adjust training horizontal bar. Specially for training(halls), because it is without tensioning.
Quick and easy height adjustment from 45 - 200 cm.
Rail can be replaced by fiberglass bar (Art. 2202205).
Horizontal Bar "Club"
Height adjustment from 60 – 300 cm without loosening the tensioning.
High bar rail rust-resistant. Ideally suited as training bar.
Horizontal Bar Supports
Two floor supports with wide contact area for a better stability. Ideal to learn various exercises and turns in handstand position. Can be used with both uneven bars and horizontal bar rails, enabling them to change quickly through a rapid relief mechanism. Height 40 cm.
No rail (4140705) or bar (2202205/ 2204825) included, need to be ordered separately!
Freestanding Uneven Bars "Club" with "Fiberflex Pro" rails
Variants:
Freestanding Uneven Bars "Club" with "Fiberflex Pro" rails
Uneven Bars with retractable legs for higher stability. Easy to operate adjusting tubes assisted by springs. Width adjustment in a instant from 120 - 210 cm (diagonal). Height adjustment from 140 - 190 cm (lower rail) and 215 - 265 cm (higher rail). A bar can easily be removed and interchanged with the rail of Horizontal Bar (Art. 4140705). Integrated built-in transport system. Can alternatively be tensioned with cables. The apparatus is delivered with two bars.Frame mat is not in the scope of delivery and must be odered separately.
Art. 4140705 Rail for horizontal bar supports
Horizontal Bar Rail "Universal“
Variants:
Horizontal Bar Rail "Universal“
Suitable for Horizontal Bar "Universal" (art. 1384215)
Trainer platform "Club"for Rings (short version)
Variants:
1490376 Trainer platform "Club" for Rings (short)
The coaching platform is not attached to the equipment and does not influence the characteristics. It automatically tips up because of the nitrogen gas loaded springs. Height Adjustment with non-slip surface from 137-197 cm in 10 cm steps. Size of Platform: 109,5 x 60 cm.
Center Mat "Moscow" for freestanding Uneven Bars "Club"
Variants:
Center Mat "Moscow" for freestanding Uneven Bars "Club"
Measurements: 225x85x20cm incl. frame cut outs
color: spiethblue
Balance Beam Padding "Competition" (per piece)
Variants:
Balance Beam Padding "Competition"
• Safety padding for competition Balance Beam "Soft Touch"
• Mandatory at FIG competition
• Preshaped foam
• Soft needle felt top layer
• Easy to fit with Velcro
• 2 pieces are necessary for one competition Balance Beam
Balance Beam "Club"
Soft training balance beam with special padding and "Vario" height adjustment. This padded beam made of aluminum profile has an additional, softer running surface under the durable synthetic leather than the competition beam. The balance between the softer running surface and the necessary stability is optimally matched. This reduces stress on the joints, minimizes the risk of injury and allows for a higher training frequency. When the height is adjusted, the feet remain in the same position so that the mats do not have to be moved.
TECHNICAL DETAILS:
Length: 5 m
Width of the surface: 10 cm
Height adjustment: 60-130 cm (from 60 - 90 cm with 10 cm increments and from 90-130 cm with 5 cm increments)
Vaulting Table "Ergojet Club"
A push-off area like at the competition vaulting table of approx. 95 x 120 cm. Easy adjustment of height by means of gas-loaded spring in steps of 5 cm from 90 to 135 cm. The cover is made of hygroscopic synthetic leather and is fixed on the upper part of the vaulting table by means of Velcro, that assures its easy replacement. Including integrated transportation wheels and protective padding of pillars.