Springboard "DynamiX 30"
Original Reuther 2.0
Springboard specially designed for children with an innovative composite material rod spring system. The design prevents force peaks and counter impacts and is the optimal combination of the properties of classic wooden springs and metal springs from the professional sector – for a gentle "dip" but a strong rebound. The degree of hardness is adjustable, so that the springboard grows with the body weight and performance level. Even with lightweight and inexperienced children, the springboard is already noticeably in motion – ideal for quick learning and continuous improvement. The optimal take-off area is color-coded, but the characteristic is very consistent even outside this area. The low weight of less than 20 kg means that the springboard is quickly ready for use – ideal for everyday training. Suitable for schools and gymnastics clubs. Made in Germany.
TECHNICAL DETAILS
- Dimensions: 120x60x22 cm
- Weight: 19 kg
- Body weight: recommended for 15-30 kg
Tension Control System (TCS) with NiMH batteries (AA)
FIG certified.
The new Tension Control System (TCS) with rechargeable NiMH batteries (AA).
It prevents from too low or too high tensioning of an apparatus thanks to the digital display.
When tensioning becomes too low or too high it is shown by means of a flashing light signal. Guarantees same tension characteristics of an apparatus and is quick to set up for athletes & coaches.
Supplied in a solid plastic case. Equipped with flashing light and start button. Displays the battery level + and the voltage in N. The device gives the tension in Newton a range from 0 N to 10.000 N with increments of 100.
Per one tensioned gymnastic apparatus is one tensioning measuring device necessary.
"Dynamoflex Pro" rail for Parallel Bars, one piece
FIG-certified competition rail "Dynamoflex Pro" for parallel bars "Melbourne" and "Melbourne Pro". Also suitable for other parallel bars, but then without FIG certification. Pre-drilled for quick and easy assembly.
The fiberglass rails enable optimal vertical dynamics for gymnastic elements between the rails and at the same time have high horizontal stability for elements performed sideways on one rail. The unique pre-tension of rails offers gymnasts great dynamics for flight elements and simultaneously reduces impact forces of landings on the arms. The natural fiber veneer provides excellent grip even when new, reduces magnesia consumption and shortens preparation time. Additionally, it extends the lifespan of the rail-surface even under high usage intensity.
The rails may only be replaced in pairs in order to maintain the device properties and safety.
Lengths 350 cm.
Parallel Bars "Melbourne Pro" with integrated wheel system
FIG-certified competition parallel bars "Melbourne Pro" with innovative "Dynamoflex®Pro" fiberglass rails enable optimal vertical dynamics for gymnastic elements between the rails and at the same time have high horizontal stability for elements performed sideways on one rail. The unique pre-tension of rails offers gymnasts great dynamics for flight elements and simultaneously reduces impact forces of landings on the arms. The natural fiber veneer provides excellent grip even when new, reduces magnesia consumption and shortens preparation time. Additionally, it extends the lifespan of the rail-surface even under high usage intensity.
The stepless width adjustment with measuring scale enables quick and repeatable individual adjustment of the parallel bars. Thanks to the integrated wheel system, the parallel bar can be placed on floor-friendly rubber wheels and moved to the desired position in just a few simple steps.
TECHNICAL DETAILS
- Height adjustment: from 160-210 cm in 5 cm increments
- Competition height according to FIG standard: position 9
- Stepless width adjustment: from 41-71 cm
Parallel Bars "Melbourne Pro" without integrated wheel system
FIG-certified competition parallel bars "Melbourne Pro" with innovative "Dynamoflex®Pro" fiberglass rails enable optimal vertical dynamics for gymnastic elements between the rails and at the same time have high horizontal stability for elements performed sideways on one rail. The unique pre-tension of rails offers gymnasts great dynamics for flight elements and simultaneously reduces impact forces of landings on the arms. The natural fiber veneer provides excellent grip even when new, reduces magnesia consumption and shortens preparation time. Additionally, it extends the lifespan of the rail-surface even under high usage intensity.
The stepless width adjustment with measuring scale enables quick and repeatable individual adjustment of the parallel bars. Transport trolleys (art. 1404016) are available as an option. If the parallel bar needs to be moved frequently to different locations, the version with integrated wheel system is recommended (art. 1403120).
TECHNICAL DETAILS
- Height adjustment: from 160-210 cm in 5 cm increments
- Competition height according to FIG standard: position 9
- Stepless width adjustment: from 41-71 cm
Tumbling Track "SPIETHway Evolution" - 25,20 m
The new FIG-certified tumbling track is now available! The consistent further development of the proven "SPIETHway" series offers the optimal combination between maximum rebound effect for the most demanding tumbling elements and damping of the unwanted force peaks to protect the joints both in training and in competition.
The overlying rollable mat composite with durable needlefelt surface in combination with an integrated mesh fabric ensures longer durability even during intensive use.
Metal connectors with "QuickConnect" system guarantee a stable connection of the individual elements while minimizing set-up and dismantling times during events.
The track is also proven as training equipment for artistic gymnastics and acrobatics. Tumbling tracks in inidiviudal lenghts are available upon request, for example for permanent installation in gymnastics centers. A suitable run-up track and landing area are available separately.
TECHNICAL DETAILS
- 21 steel frame single elements, 120 x 200 cm
- glassfiber spring system with pressure distribution plates
- anti-slip rubber feet
- total height: approx. 30 cm
- total length: 25,20 m
Uneven Bars "Munich"
Barras asimétricas de competencia"Munich"
ORIGINAL REUTHER, Certificada por la FIG.
Las barras asimétricas de competencia con nuevas barras "Fiberflex Pro" y un nuevo incorporado sistema de ajuste de altura.
Nuevo estándar de alturas según la FIG vigente estándar: barra baja 175 cm, barra alta 255 cm.
Con un nuevo ajuste de altura incorporado al sistema en los montantes.
Al empujar a los pasadores de bloqueo, la altura se puede ajustar, para gimnastas altas (en posición vertical alta em combinación con un pomo). Una adaptación del tensado es requerida.
Con sistema patentado de doble tensión incluyendo 2 ajustadores deslizantes que proporcionan el ajustamento fino individual de la tensión.
Regulaciones: barra baja de 150 a 200 cm, barra alta de 230 a 280 cm, distancia entre las barras máx. 195cm.
Balance Beam "Soft Touch"
Viga de equilibrio "Soft Touch",
ORIGINAL REUTHER, Certificada por la FIG.
La nueva y revolucionaria Viga SPIETH ‘Soft Touch’! La tecnología presenta una combinación única de aterrizajes suave y una estabilidad superior. Con la nueva tecnología "Soft Touch", la Viga mantiene su conocida estabilidad para realizar piruetas, saltos y aterrizajes. Al mismo tiempo hay considerablemente menor impacto en las articulaciones con el aterrizaje suave táctil, especialmente para aterrizajes en ambas piernas para elementos de gimnasia y acrobacia. Conoce lo mejor de 2 mundos: agarre óptimo y aterrizajes con impacto reducido en las articulaciones de los atletas durante entrenamientos largos. Una nueva forma innovadora del aluminio. El perfil hace que aparezca la barra de equilibrio ópticamente más ancho, lo que lo hace más cómodo para que los gimnastas entrenen y compite en él. Esta viga es ajustable en altura de 75 a 125 cm, con incrementos de 5 cm.
Incluye - Acolchado de seguridad de competición.
Acolchado especial para cobrir las patas de la Viga para evitar lesiones. Se necesitan 2 piezas para uma Viga de equilibrio. De acuerdo con las últimas directrices de la FIG.
Elastic Swingfloor "Moscow" 14x14 m
Variants:
1790751 Elastic Swing Floor “Moscow” 14x14 m - completely assembled
FIG-certified, ORIGINAL REUTHER
Top competition Free Exercise Swing floor with a new Spring & Security System that causes a maximum rebound effect.
Sub-construction made of:
74 pcs. of 15 mm high waterproof plywood sections.
The floor is equipped with 2.336 high quality tempered steel springs.
The sub-construction is covered by:
196 puzzle shaped foam plates (5 cm high) with special foam covered with needle fleece (2 cm high) and 7 floor mats 14m x 2m x 20mm.
The layer of special high quality foam contributes to optimized rebound effects.
Mats are linked together by 6 “Duo Velcro” straps.
4 white straps are available for marking the competition area.
Total size: 14x14m
Total height: 20 cm
Horizontal Bar "Stuttgart"
Barra Fija "Stuttgart".
ORIGINAL REUTHER, Certificada por FIG.
Ajuste de altura de 265 – 310 cm.
Barra a prueba de roturas de acero inoxidable especial de alta calidad.
Gran pretensado en la barra.
El doble tensado proporciona una gran elasticidade e soporte al aparato e reduce las vibraciones de la barra a la mitad.
Pommel Horse
Caballo con arzones,
ORIGINAL REUTHER, Certificado por la FIG.
Cuerpo resistente con capa de espuma y tapizado de cuero auténtico.
Muy solido, 2 arzones de aluminio higroscópicos.
Fácil de transportar gracias a las 4 ruedas giratorias integradas.
Se incluyen cable tensor y cerradura para anclaje al piso.
Altura regulable entre 95 y 125 cm.
Ring Frame "Berlin"
Pórtico de Anillas de competencia 'Berlin'
ORIGINAL REUTHER, Certificado por la FIG.
Amortiguadores incorporados y adicional sistema de resorte especial reduce el impacto en las articulaciones y también las fuerzas máximas.
Marco hecho de tubo de acero cuadrado con componentes individuales con un máximo de longitud de 2 m para facilitar el transporte.
Ajuste de altura en pasos de 5 cm de 595 – 625 cm (altura total).
Anillo ajustable en altura en incrementos de 2,5 y 5 cm entre 275 - 305 cm (275 - 280 cm por 5 cm, 280 – 290 cm por 2,5 cm, 295 - 305 cm por 5 cm).
Cables de acero revestidas de plástico para anillos por medio de zócalos roscados variables con un ajuste fino.
Tensión de cable doble junto con el ajuste de clave patentado proporcionar al dispositivo una gran estabilidad.
Vaulting Table "Ergojet Rio"
Mesa de Salto "Ergojet Rio”,
ORIGINAL REUTHER, certificada por la FIG.
El sistema de resorte más desarrollado proporciona una resiliencia mejorada y una estabilidad en el centro y el extremo posterior de la superficie.
Ajuste de altura con resortes de gas de 100 - 140 cm en incrementos de 5 cm. Superficie que consiste en fibra de vidrio de 2 pliegues plásticos reforzados y un sistema de resiliencia integrado.
El sistema de transporte está incluido.
Peso sin acolchado de seguridad: 135 kg. Superficie de suelo requerida: 110 x 94 cm
Incluye - Acolchado de seguridad de competición.
Acolchado especial para cobrir la base de la Mesa de Salto para evitar lesiones. Se necesitan 2 partes para uma Mesa. De acuerdo con las últimas directrices de la FIG.
Balance Beam Padding "Competition" (per piece)
Variants:
1566080 Competition padding for "Soft Touch" beam (one pcs)
• Safety padding for competition Balance Beam "Soft Touch"
• Mandatory at FIG competition
• Preshaped foam
• Soft needle felt top layer
• Easy to fit with Velcro
• 2 pieces are necessary for one competition Balance Beam
Hand Safety Mat
Colchoneta de proteccion o Collar de seguridad de 120x102x22 cm.
Colchoneta de seguridad para proteger de las lesiones resultantes de sobrepasar el trampolín durante saltos rondadas. Rodea el botador en 3 lados. El frente es 20 cm de alto según las nuevas normas de aparatos FIG. Medidas: 120x102x22 cm
Hook for Rings
Barra de gancho ligera de aluminio.
Se utiliza para desenredar y colocar anillas de forma rápida y sencilla.
Longitud: 190 cm
Landing Mat "Happy Landing" 200 x 200 x 10 cm, PVC
Variants:
"Happy Landing" 200 × 200 × 10 cm, PVC
Colchoneta Suave "Happy Landing" 200 x 200 x 10 cm
Colchoneta de aterrizaje suave con cubierta de PVC y cremallera, según especificaciones de la FIG en 10 cm de altura. Colchoneta de aterrizaje obligatoria con dimensiones de 200 x 200 x 10 cm en competencias de la FIG en piso, salto, viga de equilíbrio, barras paralelas, anillas y barra fija.
Landing Mat "Happy Landing" 400 x 200 x 10 cm, PVC
Variants:
"Happy Landing" 400 × 200 × 10 cm, PVC
Colchoneta Suave "Happy Landing" 400 x 200 x 10 cm
Colchoneta de aterrizaje suave con cubierta de PVC y cremallera, según especificaciones de la FIG en 10 cm de altura. Colchoneta de aterrizaje obligatoria con dimensiones de 400 x 200 x 10 cm en competencias de la FIG en viga de equilíbrio, barras assimétricas, anillas y barra fija.
Landing Mat "Happy Landing" 600 x 200 x 10 cm with markings
Variants:
"Happy Landing" 600 × 200 × 10 cm with markings
funda de PVC. Parte superior de zona elastica agradable para la piel. Marca para la zona del salto.
Magnesia holder for feet
Soporte de magnesio para pies.
Para uso en ejercicios de salto, piso y viga. Bandeja cuadrada de madera. Reduce el consumo de magnesia y simplifica la preparación.
Con Velcro en la parte inferior para la fijación. Se requieren dos soportes para un piso durante la competencia
Magnesia Stand "Munich"
Magnesiero de mano Soporte de magnesia "München".
Carcasa de plástico sobre base de metal, con bandeja adicional.
Mat Set "Basic" for Balance Beam "Soft Touch"
Variants:
1565847 Mat Set "Basic" for Balance Beam "Soft Touch"
ORIGINAL REUTHER, FIG-certified The surface is completely made of PVC material and has patented handgrips at the sides making moving and handling of mats very easy. The hand grips also provide necessary air circulation thus ensuring optimal damping during landings. A special latticed polyester material is integrated between the different foam layers to provide longer durability. The edge stabilization at all sides ensures additional safety an also longer durability of the mats. All the mats are supplied with washable anti-slop Bisonyl bottom.TECHNICAL DETAILS:Dimension: 1800 x 400 x 20 cm consisting of3x 300 x 200 x 20 cm1x 200x200x20 cm4x 250x200x20 cm with cutouts4x 135x100x20 cm1x 200x100x20 cmColour: spiethblue
Mat set "Basic" for Horizontal Bar "Stuttgart"
Variants:
1565827 Mat set "Basic" for Horizontal Bar "Stuttgart"
ORIGINAL REUTHER, FIG certified
4 mats 300 x 200 x 20 cm, 2 mats 300 x 200 x 20 cm with cuts - according to new FIG measurements
The surface is completely made of PVC material and has patented handgrips at the sides making moving and handling of mats very easy. The hand grips also provide necessary air circulation thus ensuring optimal damping during landings. A special latticed polyester material is integrated between the different foam layers to provide longer durability. The edge stabilization at all sides ensures additional safety an also longer durability of the mats. All the mats are supplied with washable anti-slip Bisonyl bottom. The mat cover has the sewed-on Velcro strips at all sides to have a complete landing area when several mats fixed together. To avoid the gaps between mats, there also the covering stripes of the same velour with a thin velcro available. The covering stripes supplied upon request.
Mat Set "Basic" for Parallel Bars "Melbourne"
Variants:
1565873 Mat Set "Basic" for Parallel Bars "Melbourne"
ORIGINAL REUTHER, FIG certified
The surface is completely made of PVC material and has patented handgrips at the sides making moving and handling of mats very easy. The hand grips also provide necessary air circulation thus ensuring optimal damping during landings. A special latticed polyester material is integrated between the different foam layers to provide longer durability. The edge stabilization at all sides ensures additional safety an also longer durability of the mats. All the mats are supplied with washable anti-slop Bisonyl bottom.
