The new Uneven Bars "Munich"
16 de febrero de 2022
News about products and offers
This is the official product presentation of the new competition Uneven Bars "Munich".
Find out more about the new properties of the uneven bars and discover what you can expect from the new SPIETH apparatus! It will be presented to you by none other than Nina Derwael - the 2021 Olympic champion on uneven bars:
For 2022, the FIG has set new rules for competition heights and height adjustment for tall gymnasts:
- Low bar: 175 cm (formerly 170 cm)
- High bar: 255 cm (formerly 250 cm)
- Height adjustment for tall gymnasts: + 5 cm (without additional aids - earlier with additional height adaptation)
The new competition uneven bars "Munich" meets all these requirements, is FIG-certified and thus replaces its predecessor models "Bern" and "Bern exclusive". In addition to the new integrated height adjustment, the uneven bars have also been equipped with new bars. The uneven bars rail "Fiberflex Pro" is a linen rail with a further developed surface and ensures a good grip.
New built-in height adjustment system:
- Without loosening the tensioning, the height can be adjusted by additional 5 cm due to the integrated extension system
- Simple height adjustment directly at the high upright by sliding the knob up or down - secured by a pin-lock
- With the locking pins at the uprights, the height can be adjusted quick and easy - e.g. for tall gymnasts - at high upright in combination with a knob
All the steps of the height adjustment in this video:
Technical specifications:
- Width adjustment: 110 - 195 cm (steplessly, measured diagonally)
- Adjustable heights - high rail: 230 - 280 cm in 5 cm increments
- Adjustable heights - low rail: 150 - 200 cm in 5 cm increments
TCS - Tension Control System
The Tension Control System is the right tool to better transfer the gymnastics conditions on the uneven bars from training to competition. The TCS is a tension measuring device with a digital display that can be installed on any tensioning apparatus (uneven bars, horizontal bar, rings). This allows the optimal tension of the apparatus to be determined individually for each gymnast during training and later adjusted in competition. At the same time, over or undervoltage can be avoided with the TCS. Thanks to the patented SPIETH double clamping system, only one TCS is required for each SPIETH tension apparatus.
The Tension Control System is the right tool to better transfer the gymnastics conditions on the uneven bars from training to competition. The TCS is a tension measuring device with a digital display that can be installed on any tensioning apparatus (uneven bars, horizontal bar, rings). This allows the optimal tension of the apparatus to be determined individually for each gymnast during training and later adjusted in competition. At the same time, over or undervoltage can be avoided with the TCS. Thanks to the patented SPIETH double clamping system, only one TCS is required for each SPIETH tension apparatus.
Omitir la galería de productos
Zugehörige Produkte
Uneven Bars "Munich"
Barras asimétricas de competencia"Munich"
ORIGINAL REUTHER, Certificada por la FIG.
Las barras asimétricas de competencia con nuevas barras "Fiberflex Pro" y un nuevo incorporado sistema de ajuste de altura.
Nuevo estándar de alturas según la FIG vigente estándar: barra baja 175 cm, barra alta 255 cm.
Con un nuevo ajuste de altura incorporado al sistema en los montantes.
Al empujar a los pasadores de bloqueo, la altura se puede ajustar, para gimnastas altas (en posición vertical alta em combinación con un pomo). Una adaptación del tensado es requerida.
Con sistema patentado de doble tensión incluyendo 2 ajustadores deslizantes que proporcionan el ajustamento fino individual de la tensión.
Regulaciones: barra baja de 150 a 200 cm, barra alta de 230 a 280 cm, distancia entre las barras máx. 195cm.